HDBASE100POEL Extender
1
1. Introduction
1.1 Introduction to HDBaseT Pro Extender
The KanexPro HDBASE100POEL is a transmitter - receiver set that enables you to
routes ultra high – definition signals up to 330 feet (100 meters) over single CAT6 cable
using HDBaseT Technology. This extender also features PoE – Power over Ethernet.
The Extender has an HDMI loop for local monitor out while extending 330’ to the
receiver side.
This extender set is fully compliant with the latest HDCP specifications and supports
EDID management for proper resolution output up to ultra HD 4K, 1080p/60 & 3D.
With its Ethernet ports, the extender also supports Internet access to work in a LAN.
1.2 Features
l
HDBaseT technology.
l
High Bandwidth: 10.2Gps.
l
Support CEC.
l
Support 3D.
l
Support PoC
l
HDMI/IR/RS232 signal transmitted over single CAT5e/CAT6 twist pair.
l
Max transmission distance is up to 90 meters for 1080P signals.
l
Max transmission distance is up to 35 meters for 4K
×
2K signals.
l
Support Ethernet expanding.
l
HDTV Compatible, use HDMI 1.4a and HDCP compliant.
l
Support 1080P, 1080i, 720P, 576P, 576i, 480P, and 480i.
l
High quality output video signal with 24bit/36bit deep color.
l
Bi-directional RS232 controls.
l
Bi-directional IR controls.
l
LED indicators show work status.
l
Wall/table-mountable aluminum enclosure
Note
: Please use a CAT5e/6a cable with low impedance (Shielded twisted pair will be
better and should be well grounded
)
for good transmission effect.
1.3 Package Contents
Ø
1 x HDBASET Transmitter
Ø
1 x HDBASET Receiver
Ø
4 x Mounting ears (Separated from HD Transmitter and HD Receiver)
Ø
1 x Power adapter (DC 24V, 3A)
Ø
2 x IR Emitter (MYS-003B
Φ
3.5mm plug, not included, buy it separately
)
