7. Installation & Setup
7.1 Basic Instructions
1. The set of sender and receiver can form a complex AV over IP system
that supports Web-based GUI controlling and management.
2. Any Sender can be turn into master controller just by selecting the master
controller option from the web-based GUI management system.
3. Once the master controller role is assigned to sender, then the same
sender can be used to configure all the sender and receiver connected
in the network.
4. Master controller can be accessed using the default login credentials.
A step by step configuration for first time installation
(1) Choose a Sender box as “Master Controller”, you can connect sender
to your laptop through CAT5e/6 cable directly or through a managed network
switch as shown below:
Encoder
Laptop
Figure 1: Laptop connects to Controller directly
Laptop
Encoder
Figure 2: Laptop and Controller both connect to switcher
R
10
EXT-NETAVRX_V1.0
