KanexPro EXT-4KFIBERPRO, Руководство пользователя

Страница: 9 / 17

4K/60 Fiber Optical Extender Set
5
5.2
Receiver
No. Name
Description
①
Power LED Turns red when DC power present.
②
Link status LED
Turns green when the transmitter and receiver link
successful.
③
Work status LED
Turns green when the signal data is transmitted between
transmitter and receiver.
④
Audio Mode
Switch
▪ ARC (Default): Switch the audio mode to ARC.
▪ AUDIO: Switch the audio mode to AUDIO.
The DIP switch must be worked with another switch on
transmitter, for more details, please refer to part
6.
System Application.
⑤
FW
USB port, used for firmware update.
⑥
OPTICAL IN
Connect to the OPTICAL OUT port on transmitter via two
fiber cables (A-B; B-A).
⑦
HDMI OUT
Connect to HDMI display.
⑧
AUDIO IN
Connect to audio source device.
⑨
IR IN
Work with far-end IR OUT port on transmitter, connect to
IR receiver (with carrier) to collect IR signal to control far-
end source device.
⑩
IR OUT
Work with far-end IR IN port on transmitter, connect to IR
Emitter to send IR signal to control display device.
⑪
RS232
Makes up bi-directional RS232 pass-through control with
the RS232 port on receiver. If one is connected to control
device (e.g. PC), and the other should be connected to
the third-party that need to be controlled.
⑫
DC 12V
Connect to 12V DC power adaptor.
Tx Rx
ARC
B A
AUDIO ARC
LINK STATUS
FW
1 2 3 4 5 6 7 8 9 10 11 12