KanexPro EXT-4KFIBERPRO, Руководство пользователя

Страница: 8 / 17

4K/60 Fiber Optical Extender Set
4
5. Panel Description
5.1
Transmitter
No. Name
Description
①
Power LED Turns red when DC power present.
②
Link status LED
Turns green when the transmitter and receiver link
successful.
③
Work status LED
Turns green when the signal data is transmitted between
transmitter and receiver.
④
Audio Mode
Switch
▪ ARC (Default): Switch the audio mode to ARC.
▪ AUDIO: Switch the audio mode to AUDIO.
The DIP switch must be worked with another switch on
receiver, for more details, please refer to part
# 6.
System Application.
⑤
FW
USB port, used for firmware update.
⑥
OPTICAL OUT
Connect to the OPTICAL IN port on receiver via two fiber
cables (A-B; B-A).
⑦
HDMI IN
Connect to HDMI source.
⑧
AUDIO OUT
Connect to audio broadcast device.
⑨
IR IN
Work with far-end IR OUT port on receiver, connect to IR
receiver (with carrier) to collect IR signal to control far-
end display.
⑩
IR OUT
Work with far-end IR IN port on receiver, connect to IR
Emitter to send IR signal to control source device.
⑪
RS232
Makes up bi-directional RS232 pass-through control with
the RS232 port on receiver. If one is connected to control
device (e.g. PC), and the other should be connected to
the third-party that need to be controlled.
⑫
DC 12V
Connect to 12V DC power adaptor.
Tx Rx
ARC
B A
AUDIO ARC
LINK STATUS
FW
1
2
3 4 5 6 7 8 9 10 11 12