6
5.3
Pairing Instruction
Power on the transmitter and receiver then press simultaneously the
PAIR
button for three seconds, and the
LINK LEDs
will flicker quickly. If the
LINK LEDs change from flicker quickly to indicate that means pair
success. Then let go of your hands and the LINK LEDs are off. When the
transmitter and receiver have signal transmission then the LINK LEDs will
flicker slowly.
LINK LED status
(Green)
Description
Flicker quickly
Establish pairing.
Illuminate
Paired success.
Off
No pair or paired success but no signal transmission.
Flicker slowly
Transmitting video signal.
5.4
Updating Instruction
The update file needs to change the name for update bin then put in the
root directory of U disk. The unit is power off status and inserts the U disk
to SERVICE port. Hold down the PAIR button and power on the unit
simultaneously. The LINK LED indicates when the unit is updating then let
go of your hand. If the update has finished, the LINK LED will
automatically off.
5.5
IR Pin Definition
IR Receiver and Blaster pin’s definition as below:
IR RECEIVER
IR BLASTER
IR Blaster Signal Power
NC
IR Signal
Power Grounding
IR Blaster
IR Receiver
