Micro USB connecter for Recharge
You can use enclose USB cable or another cable to connect with BT-7100(K166-1013) for recharge it.
Operating:
Before you starting use this keyboard, please detail READ below operating information;
Notice:
Please recharge full battery power before you first time use BT-7100/K166-1036.
Charging Way:
(Please put enclose cable from USB “A” type connector into you PC, Notebook or with right 5VDC adpater then put
micro USB connector side into BT-7100(K166-K1036)keyboard, it will automatically charge)
A.Connect iPhone or iPad
1.Take out keyboard unit
2.Open PE bag of keyboard
3.Full charge keyboard battery power via enclose cable.
4.Then, slider On/Off switch button to “on” status then you will find LED2 will blink while, it is mean the keyboard
have been power on status for waiting pairing with iPad or iPhone devices.
5.Open you iDevice Bluetooth searching mode then press the keyboard unit pairing button key(it locate on keyboard
back side). You will find “Kanex Mini BT keybaord” string information shown on device, please select the icon then
press “Enter” key, your iDevice will automatically connect with keyboard unit.
6.When you will not use keyboard for long time, we suggest you should turn off the power switch from “on” to “off”
status, keyboard will be cut off power. If you want to use it again, you just need to turn on power on switch then
keyboard unit will auto connect with original iDevce again.
B.Android or Window OS and Mac OS X connect
Follow above item “A” procedure are similar to connect with part of Android 4.0/5.0/6.0 above and Mac OX 10.6
above device.
Recharge way
When LED2 blink during typing time, it means the keyboard battery have low power status, please put USB cable
into keyboard and Notebook(or PC) USB port or AC to DC USB adapter(DC5V / 0.1A) for charge immediately, it will
be spend 1.5~2 hours then fully charged keyboard battery.
Troubleshooting
Q1 : You can’t pairing Hama Keyboard unit
1.As power saving design concern, if you didn’t touch ID button key over pass 30 minutes after pairing process,
please turn off power switch then re-open power switch again then you just doing press ID button for pairing again.
2.if keyboard unit have any power offer issue, you can try to turn off power switch then turn on it again, then you can
re-pairing it again between idevice and keyboard for connect again.
3.Please make sure does the rechargeable battery power is fully enough for working, if not, you can find the LED2
will glitter during teyping process, you should recharge keyboard battery power immediately.
Q2 : Keyboard unit had connected with iDevice successfully but it is still not working:
1. Please make sure does the rechargeable battery power is fully enough for working, if not, you can find the LED2
will glitter during teyping process, you should recharge keyboard battery power immediately.
