Dual hotkey functions:
Fn+screen brighter
f1
Fn+screen dimmer
f2
Fn+home
f3
Fn+searching
f4
Fn+virtal keyboard
f5
Fn+Siri
f6
Fn+ Previous Track
f7
Fn+Pause/Play
f8
Fn+ Next Track
f9
Fn+Mute
f10
Fn+Volume down
f11
Fn+Volume up
f12
Bluetooth function in Multi-Sync. setting
press fn+key 1
BT1 mode(keyboard will connect with iDevice under BT1 mode)
press fn+key 2
BT2 mode(keyboard will connect with iDevice under BT2 mode)
press fn+key 3
BT3 mode(keyboard will connect with iDevice under BT3 mode)
press fn+key 4
BT4 mode(keyboard will connect with iDevice under BT4 mode)
**if you want to back to factory reset, you can press
“
fn+ID pairing button
”
, then keyboard unit will be cleaned all
muti-sync. memory inside Bluetooth chipset.
”
LED signal description (from right to left)
LED1
Red color
LED1 Red color will keep lighting on during recharge process, it will be snuff out when battery full recharge.
2.LED2
Blue color
(Pairing, Battery Low status and each BT mode setting status indication)
1.When you turn on power, the LED2 blink 4 times, it represent power on status or it will be in pairing status.
2.The LED will be blink one time when you toggle each BT mode status via fn+BT1 to fn+BT4.
3.When LED2 blink during you are typing each key time till power shut down, it represent battery is low situation,
you have to recharge the keyboard battery immediately.
3.LED3
Green color.
It represent upper case status when LED lighting on.
**On/Off slider switch **Slider switch to on, the power will be lighted on status.**
**Slider switch to be turn off, the power will be lighted off**
ID button switch(in keyboard backside)
Press the ID button, keyboard function will become in pairing process.
