K&S KS 12-1E ATSR, Инструкция

Страница: 10 / 28

9
Model KS 12-1E ATSR KS 12-1E 1/3 ATSR KS 15-1E ATSR KS 15-1E 1/3 ATSR
Voltage (V) 230 230 400 230 230 400
Maximum power 9.2 kW 8.2 kW 11.5 kVА 12.5 kW 11.5 kW 15.6 kVА
Nominal power 9.0 kW 8.0 kW 11.25 kVА 12.0 kW 11.0 kW 15.0 kVА
Frequency (Hz) 50 50 50 50
Max. current (A) 40 35 17 53 48 22
Outlets
1х63A (230V)
1х32A (230V)
1x16А (230V)
1х32A (400V)
1х32A (230V)
1x16А (230V)
1х63A (230V)
1х32A (230V)
1x16А (230V)
1х32A (400V)
1х63A (230V)
Fuel tank volume (L) 55 55 55 55
LED display Operating hours, frequency, voltage, oil level
Noise level Lpa (7m)/Lwa, dB 71/96 71/96 72/97 72/97
Output 12V (A) + + + +
Engine model KS 650 KS 650 KS 780 KS 780
Engine type
Gasoline powered one-cylinder, four-
stroke air-cooled
Gasoline powered two-cylinder, four-stroke
air-cooled
Engine power (HP/kW) 18.5/13.6 18.5/13.6 22.0/16.18 22.0/16.18
Generator emergency stop
button
+ + + +
Crankcase volume (cm3) 1.4 1.4 1.5 1.5
Engine volume (cm3) 625 625 750 750
Power output controller Intelligent AVR
Engine start Manual/Electric Manual/Electric Electric Electric
Power factor (cosφ) 1 1 0.8 1 1 0.8
Battery (Ah) 21 21 36 36
Net dimensions (L*W*H) (mm) 790x705x680 780x705x680 797x705x805 797x705x805
Gross dimensions (L*W*H) (mm) 800x715x780 800x715x780 807x715x905 807x715x905
Net weight (kg) 131 131 157 157
Gross weight (kg) 145 145 165 165
Protection class IP23M
Nominal voltage tolerance - max. 5%
7. GENERATOR SPECIFICATIONS
To ensure reliability and increase the engine service life, peak powers may be slightly limited by circuit breakers.
The optimal operating conditions are ambient temperature of 17-25 °C, barometric pressure of 0.1 MPa
(760 mm Hg), and relative humidity of 50-60%. Under these environmental conditions, the generator can provide
maximum performance in terms of the declared specifications.
In the event of deviations from these environmental indicators, the generator performance may vary.
Please note that in order to preserve the long service life of the generator, continuous loads of more than 80% of
the nominal power are not recommended.