Kandolite KWW36W1RGB, Руководство пользователя

Страница: 8 / 16

4. When the screen flashes, it indicates that in the set-state. If you do not press any key
for 8 seconds, the state will saved automatically, and when you turn on the
lights next time will show this state.
Operating Control Instruction
Master/Slave
Master ： The master should set as built-in program and shows” P - X – X” send
out synchronization signals. To avoid the host signal and DMX512 signals
interfere with each other, should cut off the DMX512 signals. The signal lines
are longer than 60 meters, should increase a signal amplifier.
Slave ： It must be in the SLAV mode and the address code should be A001 to
assure receive the master’s signals correctly. Only one light can be set as a
Master and others are slaves.
Note: This product uses input and output power cord 1 m
㎡ ㎡ ㎡ ㎡
copper
core wire, power line in series, when 220V AC should less than 25
lights, and 110V AC less than 13 lights! ! !
XLR cable connecting
XRL cable
： ： ： ：
The stand connection way of the XRL is: one end connect to the male plug ,and the other
connect to the female.