background image

12) Install the K&N filter adapter onto the mass-air sensor using the stock gasket and four allen bolts.  Use a thread locking 

compound and do not over-tighten the bolts.  (see fig. 2)

13) Install the "L" bracket onto the 20mm bolt using the nylock nut provided, but do not completely tighten at this time. (see fig. 3)

14) Remove the bolt holding the air conditioning lines to the fenderwell.  If the vehicle is not equipped with A/C, the hole will be 

empty.  (see fig. 4)

15) Install the mass-air / adapter assembly into the intake hose, but do not tighten the hose clamp at this time.  
16) Use the original bolts to secure the mass-air bracket and the "L" bracket, to the fenderwell.  If the vehicle is not equipped

with A/C, use a supplied allen bolt to secure the "L" bracket.

17) Tighten the nut on the "L" bracket, at the adapter, and the hose clamp on the intake hose.
18) Re-connect the vacuum hoses to the mass-air bracket.
19) Plug the power cable in to the mass-air sensor and secure the wire to the sensor with the plastic clip.
20) Install the K&N Filtercharger® onto the adapter, do not over-tighten hose clamp!
21) Install the inter-cooler tubes back into the vehicle.
22) Re-connect the battery cable.  Double check to make sure everything is tight and properly positioned before starting the 

vehicle.

23) The C.A.R.B. exemption sticker, (attached) must be placed in a visible area under the hood, so that an emissions inspector 

can see it  when the vehicle is required to be tested for emissions.  California requires testing every two years, other states
may vary.

24. It will be necessary for all FIPK’s to be checked periodically for realignment, clearance and tightening of all connections.

Failure to follow  the above instructions or proper maintenance may void warranty.

*FREE K&N DECAL To register your warranty, please see us online at knfilters.com/register. FREE K&N DECAL*

fig. 3

fig. 4

3

ROAD TESTING

Start the engine with the transmission in neutral or park, and the emergency brake on.  Listen for any air leaks or odd noises.  If
there are air leaks, make sure the hose connections are secure.  If there are any odd noises, check for the cause and repair before
proceeding.  The K&N Filtercharger

®

Injection Performance Kit will function identically to the factory air filter with the exception of

being slightly louder than stock and much more responsive.  If all preliminary checks are okay, then a road test is necessary.
Listen carefully for rattling or other odd noises and fix as necessary.  If the road test is fine, you can enjoy driving as normal  with
the added response and power.  We suggest that the Filtercharger

®

element be checked periodically for dirt.  This is now very

easy due to the open element configuration.  If the filter material is overly dirty, service it according to the instructions that are in
the Recharger service kit, part number 99-5050 or 99-5000.  If you have any questions or problems, inquire at your nearest K&N
dealer, or direct to K&N Engineering at (909) 684-9762.

PARTS LIST

desc

qty

part#

A

6mm -1.00 x 16mm allen bolt

4

07818

B

6mm -1.00 x 20mm allen bolt

1

07852

C

6mm -1.00 nylock nut

1

07553

D

"L" bracket

1

07868

E

die-cast filter adapter

1

08842

F

size 104 hose clamp 

1

08697

G

Filtercharger® element

1

RC-2960

17785a
1/27/04

Содержание Filtercharger 57-9004

Страница 1: ...FILTERCHARGER INJECTION PERFORMANCE KIT K N Engineering Inc 1455 Citrus Avenue P O Box 1329 Riverside CA 92502 INSTALLATION MANUAL Toyota Supra Turbo 1987 1993 L6 3 0L Turbo P N 57 9004 CARB E O D 269 3 ...

Страница 2: ...nd allowing for a less restrictive entry into the engine Air moving in a straight direction moves faster than tumbling air thus creating an increase in air flow See the figure below AIR CLEANER DESIGN EFFECTIVENESS To design an effective performance air filter assembly two factors must be considered the air filtering element and the air filter adapter On fuel injected computer controlled vehicles ...

Страница 3: ...pring clip and remove the wire from the mass air sensor hooked to a small bracket with a plastic clip 6 Un hook the vacuum hoses from the mass air bracket Do not remove them from the vehicle 7 Remove the mass air sensor and airbox as an assembly 8 Unclip the airbox lid and remove the air filter 9 Remove the nuts holding the mass air sensor to the airbox there are metal locking tabs over the nuts t...

Страница 4: ...her states may vary 24 It will be necessary for all FIPK s to be checked periodically for realignment clearance and tightening of all connections Failure to follow the above instructions or proper maintenance may void warranty FREE K N DECAL To register your warranty please see us online at knfilters com register FREE K N DECAL fig 3 fig 4 3 ROAD TESTING Start the engine with the transmission in n...

Отзывы: