USAGE NOTES / FUNCTIONS
4. PRELOAD THE CLAMPING BRACKET
To ensure the proper functioning of the clamping
bracket, the closure of the clamp lever must be done
with a certain amount of force. If, however, the clamp
lever closes too easy or is very difficult to close the
preloaded setting must be adjusted accordingly.
PROCEDURE:
4.1
Open the clamp lever
4.2
Tighten or loosen with an Allen wrench
4.3
Close the clamp lever
Repeat this procedure as needed until the
clamp lever can be operated with medium force
and the extension tube is in proper position.
OBJECTIVES:
a. In the case of a closed clamp lever the extension
a.
tube must be placed through the clamping bracket,
a.
i.e. it needs to be clamped immovable.
b. When the clamp lever is open the extension
b.
tube height can be adjusted.
5. ADJUST THE SEAT HEIGHT
5.1
Open the gray clamp lever
4.1
5.2
Pull on the locking knob.
5.3
Adjust the extension tube to the desired height.
5.4
Let the locking knob click into the slit.
5.4
NOTE:
5.4
The Drummer throne may not be used if the locking
5.4
knob is not clicked into place. The extension tube
5.4
could retract inadvertently and put the drummer at
5.4
risk (risk of injury).
5.5
Close the gray clamp lever
4.3
.
6. SET THE SPINNING MOVEMENT OF THE SEAT
6.1
Tighten wing nut below the seat more or less firmly
6.1
(see chapter
3.3
):
6.1
so the rotation of the seat cushion can be adjusted
6.1
from smooth to tough
6.2
The seat is not designed to be stationary and
6.2
this is also not possible.
6.2
Do not over-tighten the wing nut.
7. AFTER USE
7.1
Disassembly is done in reverse order of the setup.
7.2
For transportation and long-term storage, we
7.2
recommend that the base be separated from
7.2
the cushion seat and be stored in the original
7.2
packaging.
8. DIMENSIONS
8.1
Transport- / folded dimensions
8.2
Setup and functional dimensions
9. ACCESSORIES (optional)
For mounting the accessories
9.1
/
9.2
, there are four
M6 threaded bushes on the underside of the cushion
seat, which are covered with the leather cover but can
be easily felt.
If necessary, pry open the leather cover at those points.
9.1 BUTTKICKER®
9.1
(Products: Buttkicker® Concert and ButtKicker® LFE)
9.1
The Buttkicker® is fixed underneath the seat with the
9.1
four screws and spacers of the accessory bag
1.c
.
9.2 BACKREST
(14005-000-02)
9.2
If necessary, the drummer's seat »Gomezz« can be
9.2
equipped with a backrest. It is adjustable in depth
9.2
and height. The matching screw connection is
9.2
included in the scope of delivery of the backrest.
4. PRELOAD THE CLAMPING BRACKET
5. ADJUST THE SEAT
4.
HEIGHT
9. ACCESSORIES
8. DIMENSIONS
FAULT-FINDING (F) and REPAIR (R)
F: The height adjustment of the extension tube is difficult R: There may be dirt or foreign objects between the tubes:
R:
carefully clean the tube combination
R: Adjust the pre-setting of the clamping lever
4
F: The extension tube is not stable and R: Ensure that the locking mechanism is set properly
5.4
F:
retracts under a weight bearing load
R: Adjust the pre-setting of the clamp lever
4
F: The base and legs are difficult to move R: Spray on some silicone spray.
9.1 BUTTKICKER®
9.2 BACKREST
® "Buttkicker" is a registered Trademark
of the Guitammer Company Inc.
Sale: Fischer Amps
adjustment range height
adjustment range depth
