SAFETY NOTES
WARNINGS
SETUP INSTRUCTIONS
- Please expressly note that this is not to be used as a ladder or stepping aid.
- The cushion seat is not screwed on to the extension tube, rather it is
-
simply placed on the tube and fastened and can dislodge when lifting it.
-
Be sure: to transport the extension tube and cushion seat separately or
-
Be sure:
hold onto the base and the seat at the same time.
- The caps are made of high-quality material and to the extent possible
-
free from softening agents. In spite of this, the use of a slip-resistant pad
-
to place the legs on is recommended, because they can leave marks on
-
delicate floors (e.g. certain wood floor types).
1. COMPONENTS
Please check to ensure that all components are
included and to the extent possible in working order.
a
Base,
b
Cushion seat,
c
Accessories bag: 1 - Spacer washer (4x),
c
Accessories bag:
2 - Screw M6 x 30 mm (4x),
c
Accessories bag:
3 - Allen wrench SW5
Also check that the movable parts are in working order
(extension tube, leg struts, pull-button, clamping lever).
2. BASE
Remove the base from the box.
2.1
Starting with the leg caps pull the legs until they
2.1
are fully extended.
2.2
Be sure the lower bracket goes as far as it will go
2.2
on the base tube.
3. CUSHION SEAT
Remove the cushion seat from the box
3.1
Remove the wing nut from the bottom of the seat.
3.2
Place the seat on the extension tube as far as it
will go.
3.3
Tighten the wing nut to your specifications:
3.3
this is how the spinning movement of the seat can
3.3
be adjusted from easy to move and less easy to
3.3
move (see chapter
6
).
It is possible to attach a backrest (K&M Art. no. 14005)
or a Buttkicker® to the underside of the seat (see
chapter
9. ACCESSORIES
).
Thank you for choosing this product. Please read and follow the instructions carefully. They inform
you about all the important steps concerning assembly and handling. We recommend you to keep
them for future reference.
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
14020-019-02 Rev.09 03-80-140-00 12/20
- Max. 100 kg weight bearing load
- Be sure that the surface is suitable, sturdy, level and load bearing.
- The fact that the product is collapsible and adjustable, can result in the
-
risk of pinching/wedging. Careful and attentive handling during setup,
-
operation and disassembly is indispensable.
- The locking knob must be clicked fully into place, otherwise there is a
-
risk of it retracting on its own.
-The gray clamp-lever must always be in the locked position.
- The best stability is achieved by extending the legs as far as they will go,
-
which is when the movable bracket
2.2
is as far as it will go in the
-
downward direction.
14000 Drummer's throne
»Gomezz«
- Drummer Throne for the Professional Drummer: very stable and robust
- Variable height adjustment in 10mm steps
-
from min 475 to max 675 mm
-The spin movement of the seat can be adjusted individually and variably
-
from easy movement to less movement.
- Best seat comfort through high quality cushions and
-
ergonomically formed seat
- Permanent rubber caps with excellent noise dampening
- Suitable for touring: space-saving foldable, Weight: 6.1 kg
- Seat can be equipped with a Buttkicker® or backrest
1. COMPONENTS
3. CUSHION SEAT
2. BASE
TECHNICAL DATA
Material
Steel tubes, steel struts: Chrome
Brackets: PA-6 black
Clamp lever, locking knob: POM gray
End caps: TPE-Evoprene, black
Cushion seat: Imitation leather, black
Load
up to 100 kg
Dimensions
Seat height: 475-675 mm, Base diameter: 680 mm
Transport dimensions: seat 430 x 420 x 185 mm
Weight
6.1 kg
Packaging
Single box: L x B x H 510 x 395 x 210 mm
optional
accessories
Backrest K&M 14005-000-02
Four M6 threaded bushings are provided underneath
the cushion seat for mounting a Buttkicker®.
