TECHNICAL DATA
Material
Stand: aluminum tubes, steel struts
Clamps, handles, caps: PC, PA, TPE
Tray: steel, handle: PA
Load capacity
max. 30 kg*
Dimensions
max. root circle: diameter 740 mm
Base/extension tube: diameter 42/ diameter 35 mm
Setup height: -1,000 -1,220 -1,440 mm
Tray inner dimension: 669 x 394 mm
Net weight: 6.6 kg
Packaging
Carton 825 x 415 x 275 mm, 1.1 kg
FAULT-FINDING (F) and REPAIR (R)
F: STAND WOBBLES / STANDS AT AN ANGLE:
F:
R: Check floor for evenness
F:
R: Spread feet to maximum
2.3
,
2.4
F:
R: Ensure centered load
4.1
F:
R: Keep away from or compensate for external influences
F: EXTENSION TUBE WOBBLES / SLIDES IN UNINTENTIONALLY:
F:
R: Engage bolt
7.5
F:
R: Tighten clamping screw (
6.5
)
F: TRAY WOBBLES OR TWISTS UNINTENTIONALLY
F:
R: Tighten clamping screw
4.4
MAINTENANCE
USER INSTRUCTIONS / FUNCTIONS
4. HANDLE LOAD
6. EXTEND EXTENSION TUBE
7. RETRACT EXTENSION TUBE
5. HEIGHT
4. HANDLE LOAD
- In principle, the load can be applied to the retracted or extended tube.
- Do not underestimate the weight of the load.
- If necessary, the load must be set up and extended or retracted by qualified
-
and physically fit personnel.
4.1
Load (device(s)) must be as CENTERED as possible on the plate.
4.1
This ensures that the installation (i.e., the combination of stand, support
4.1
plate, and load-bearing capacity is perfectly balanced and thus provides the
4.1
basis for optimum stability.
4.2
To align the device, slightly loosen the clamping screw…
4.3
…and gently turn the plate.
4.4
Tighten the clamping screw again to secure.
5.6.7. HANDLE EXTENSION TUBE
NOTE
In principle, the height adjustment can be loaded or unloaded.
- We recommend working with two people when the tray is loaded:
-
FIRST PERSON (P1): moves and firmly holds the extension tube with the load
-
SECOND PERSON (P2): operates the safety elements of the tension clamp
- SECOND PERSON (P2):
(clamping screw and locking bolt)
WARNING!
If the loaded extension tube can no longer be held securely by the FIRST
PERSON when extending (see Chapters
6
and
7
), the SECOND PERSON
must:
a. immediately tighten the clamping screw
6.5
,
b. immediately release the locking bolt
7.5
, and ensure that it engages
b.
automatically in the nearest hole.
5. HEIGHT
5.1
The extension has three locking holes, each 220 mm apart.
5.2
Adjustable heights: - 1,000 mm - 1,220 mm - 1,440 mm
6. EXTEND EXTENSION TUBE
6.1
(P1) Hold extension tube in place
6.2
(P2) Loosen clamping screw
6.3
(P2) Unlock the locking bolt using the pushbutton
6.4
(P1) Extend the extension tube until it engages in the corresponding hole
6.5
(P2) Tighten the clamping screw again
7. RETRACT EXTENSION TUBE
7.1
(P1) Hold extension tube firmly; do not grip over the locking hole
7.2
(P2) Slightly loosen the clamping screw – just enough to unlock the
7.2
(ZP)
locking bolt
6.3
7.3
(P1) Hold the extension tube firmly, and lower it in a controlled manner
7.4
(P2) Tighten the clamping screw in a controlled manner in order to allow
7.4
(ZP)
the extension to retract gently and slowly until the…
7.5
(ZP)
…locking bolt engages again (recognizable from the outside by the…
7.5.1
WP
…push button (this may not protrude)).
PURPOSE:
Maintaining the mobility, load-bearing capacity, and safety of the installation
through:
- careful handling, - constant care, - necessary maintenance
MEASURES :
- Maintenance and repair must always be carried out in an unloaded condition.
- There is a potential risk of crushing during maintenance work when the feet are
-
folded in. Careful handling is required to prevent this. Wear protective gloves if
-
necessary.
- For cleaning, use a slightly damp cloth and a non-abrasive cleaning agent.
- Other measures (e.g., periodic lubrication) are not required.
