3.) Place loudspeaker box
!When attaching the loudspeaker box and adjusting the inclination/direction, there is a
danger of crushing between the loudspeaker and the wall bracket respectively between
the components!
!Due to the position of the loudspeaker box there is a danger from falling parts!
Place the loudspeaker box on the mounting bolt.
Depending on the weight of the speaker used, it
is advisable to carry out this operation with ano-
ther person. The bolt must be completely immer-
sed in the speaker and must not tilt. Via the
adjustability of the mounting bolt you can set the
distance between the wall and loudspeaker box.
4.) Adjust inclination and direction
Always adjust the inclination without the loudspeaker. To
adjust the inclination, the clamping screw must be completely
removed. To do this, remove the protective cap and unscrew
the M6 nut underneath. Remove nut, washer and carriage
bolt. Hold the support arm firmly, as it will fall down when the
clamping screw is removed. Set the desired inclination and
mount the clamping screw in reverse order and tighten it
firmly. The inclination can be adjusted in six positions from
0° to -30°. To adjust the direction, swivel the loudspeaker
box to the desired position. The axis of rotation is tenaciously
adjusted, no screw needs to be loosened for swiveling.