24173 Speaker wall mount
Information for use
Intended use
The speaker wall mount supports a loudspeaker box with a mounting diameter of 35 mm and is
designed for a load capacity of 25 kg. The wall mount disposes of a five-step tilt adjustment and
a continuously variable horizontal swivel.
Foreseeable misapplication
Do not open the clamping and adjustment screws while in use. An abrupt deposit of the loud-
speaker box may cause the overloading of supporting components, for a short period time.
General
u
It must be ensured that the speaker wall mount can be firmly attached to the wall.
u
● The wall must have sufficient load-bearing capacity and should be able to hold any
u
●
additional forces.
u
● Select the correct fastening material depending on the wall texture.
u
●
e.g. bolt anchor ø 8 mm, frame anchor ø 10 mm.
u
● Pay attention to possible running pipelines or electric lines.
u
Follow the installation instructions for the fasteners used.
u
Observe the enclosed info sheet "General safety and assembly instructions".
u
The installer must be physically and technically fit and familiar with the currently applicable
u
local/state regulations.
u
There is a risk of crushing between the speaker wall mount and the loudspeaker box during
u
attachment.
u
Due to the adjustment possibilities, there is a risk of crushing between the components.
u
Always adjust the inclination without the loudspeaker box.
u
Due to the installation height, there is a danger from falling parts.
u
The usage information’s are part of the product and must be kept for its service life or passed
u
on to any subsequent owner or user.
Warranty
No warranty is given for damage caused by:
u
Non-observance of the usage information and the "General safety and assembly instructions".
u
Unsuitable or improper use.
u
Incorrect installation or commissioning by the buyer or third parties.
u
Natural wear and tear.
u
Careless handling.
u
Improper modifications or repair work by the buyer and third parties.
u
Impact on components of foreign origin.
u
Use of non-original spare parts.
Modifications, additions and conversions that may impair safety are prohibited without the manu-
facturer's approval.