92798 Cape Arago Hwy, Coos Bay, OR 97420 | 541-888-3517 | Toll Free 800-867-6863 | kksound.com
M A N D O L I N T W I N F U S I O N
Thank you for choosing the Mandolin Twin Fusion! This pickup system can easily be installed by the
musician. It provides the same great sound as the fully internal Mandolin Twin System offered by K&K
Sound but it does not require any permanent alteration to your instrument.
We recommend a K&K Pure Preamp or a K&K Pure XLR Preamp with this setup in order to have great sound
with any amp/PA and in any situation.
INSTALLATION
1.
The picture shows the desired locations of the two transducers
inside the mandolin. In some models the two braces will run
differently than shown here.
If a brace does not allow you to place the pickup next to the exact
center (the widest part) of the F hole, just move the pickup up or
down a bit until you find a spot that fits the transducer. However,
move it a little as possible from the position shown.
2.
The materials you will need for installation, from left to right:
Scissors, tweezers (if you do not have tweezers handy, a pair of
small needle-nose pliers will work just fine). In the sales package,
locate the bent nail (this is your installation tool), the putty piece
(gray putty on brown/white paper), the double-stick tape (on
brown/white paper), and, of course, the pickup.
