www.kg-groep.com P 3
2
A
BBREVIATIONS
NMS NANO/MAR System
NCP
NANO Control Panel
NETB NANO ETB/MAR/BOX (extinguishers terminal box)
PDS
Programming Dip Switch
CP
Connection Point
PSU
Power Supply
VFC
Volt free contact
EOL
End of line device
PCB
Printed circuit board
3
I
MPORTANT
N
OTES
–
PLEASE
READ
CAREFULLY
This quick guide manual is an addition to the existing DIOM of the NANO MAR SYSTEM dated January
1, 2023 version 1.2 from the K&G Groep BV. This quick guide should be read thoroughly and
understood before installing of the NMS is undertaken. It is assumed that the person installs, testing
and commissioning the system, is familiar with the terminology and the objective of the equipment.
The NCP and the corresponding connections must be properly connected to the NETB and KG/KVB
Stat-X extinguishing aerosol generators by an appropriately qualified and competent person. The
equipment is only guaranteed in accordance with the DIOM of the NANO MAR SYSTEM dated
January 1, 2023 version 1.2.
4
C
ERTIFICATION
The NMS has successfully passed CE and FCC, EMC testing according to EN 50130, EN 61000, EN
55016, 47 CFR15-ICES-003, ANSI 63.4, IEC60945-pt11 and a DNV marine type approval according
the DNV Class Guideline 0339-2021, certificate TAA000037H. For that the NMS has endured
extensive environmental tests such as vibration, dry heat, damp heat and cold tests in accordance
with the requirements of the DNV-CG 0339 standard.
5
P
REFASE
In our standard DIOM is all written for installing/commissioning and servicing the NMS, NCP control
panel and extinghuishers terminal box NETB. This quick guide is a shortened step-by-step plan who
guides you to put the system into operation. The NMS is a multi-functional controller for fire
detection and fire extinguishing release systems. This quick guide only covers the NMS intended for
rooms on vessels. For other applications, please refer to the standard and comprehensive
installation instructions.
6
P
URPOSE
The purpose of this document is to describe installation, service and troubleshooting of the NMS.
Please note that only aspects regarding the NMS itself are covered by this manual. Physical
placement of aerosol generators and cables etc. is not handled as these issues are typically to be
specified specifically for each installation. The purpose of the NMS is to control and monitor a
number of aerosol generators mounted on a ship as part of a fire extinguishing system.
