Kanardia EMSIS, Инструкция по установке и эксплуатации

Страница: 36 / 72

Emsis — Manual 5.4 Emsis Setup Screen
Figure 14: List of sensors connected to Daqu unit
Each row in the table corresponds to one Daqu channel. Channels
are labelled as combination of one capital letter and one number.
Letters define the channel type, while numbers enumerate channels
of each type.
The following channel types are used in Daqu:
ˆ
A: analog channels with –2.5 V to +2.5 V input, which are
typically used to connect resistive sensors and thermocouples.
ˆ
B: analog channels with 0 to +5 V input, used to read active
sensors. Active sensors require power in order to operate prop-
erly.
ˆ
C: analog channel with 0 to +30 V input, used to read higher
voltage levels.
36
©
Kanardia 2021