Aetos User’s Manual
11.1
The Qt Library
5. Compile library with:
# make
6. Install library with:
# make install
Library files are installed into folder:
{DIR}/host.a20/usr/arm-buildroot-linux-gnueabihf/sysroot/QT
11.1.4
Installing Modified Qt Library
The LGPLv3 license allows you to freely adapt and change the source code
according to your needs.
1. Use your favorite source code editor to edit and modify the Qt library
source code.
2. Compile the changes using the toolchain (see section 11.1.3) and produce
the binaries.
3. Copy the binaries to a USB memory stick. Put them into the root folder.
4. Insert the USB stick into Aetos.
5. Switch to the
Options
page and then select the
Info
icon.
6. Select the
Qt Library
from the list.
7. Select the
Install Qt Library
option.
8. Confirm the decision – select
Yes
.
9. Aetos will copy the libraries found on the USB stick to the internal flash
drive by overwriting any existing libraries.
10. Close all windows and turn Aetos off.
11. Power Aetos on. Now, it should start with new version of Qt libraries.
If something goes wrong and Aetos does not start anymore, start it in emer-
gency mode. See section 8.2 . Then perform software update with the official
version of Aetos software. This should restore Aetos back to working state.
72
©
Kanardia
2020
Содержание Aetos
Страница 1: ...AETOS User s Manual Kanardia d o o March 2020 Release for software version 3 6...
Страница 2: ......