Kampmann KSH, Инструкция по сборке, установке и эксплуатации, Страница: 14 / 20

KSH
Luftdurchlässe
Assembly, installation and operating instructions
14
6.2.3 Fitting position of the diffuser front
Pay attention to the correct position when fitting the front of the diffuser!
In the standard fitting position, a small adhesive label stating “top” on the front of the diffuser indicates the correct pos-
ition of the front of the diffuser.
In alternative fitting positions, the front of the diffuser also needs to be fitted in such a way that the adhesive label
points upwards. This prevents the supply air from blowing downwards.
Alternative installation situation (KSH
rotated)
Standard installation situation
Fig. 8: Fitting positions of KSH
6.2.4 Adjusting the eccentric rollers
The air stream can be manually adjusted using the eccentric rollers as shown on the diagram below using a slot-head screw-
driver.
C/D
4/3
B/C
A
/B
1/A
3
/2
2
/1
D/E
E/
F
F/
6
6
/5
5
/4
A
B
C
D
E
F
6
1
2
3
4
5
min. ma x.
Reading area
Volumetric flow
Air stream directions
Fig. 9: Control of the air stream direction