Kampmann KSH, Инструкция по сборке, установке и эксплуатации, Страница: 12 / 20

KSH
Luftdurchlässe
Assembly, installation and operating instructions
12
6 Installation and wiring
6.1 Requirements governing the installation site
Only install and assemble the unit if the following conditions are met:
Make sure that the wall/ceiling is sufficiently load-bearing to take the weight of the unit (
Technical data [
}
9]
).
Make sure that the wall/ceiling is sufficiently load-bearing to take the weight of the unit.
Make sure that the ceiling is sufficiently load-bearing to take the weight of the unit (
Technical data [
}
9]
).
Make sure that the unit is securely suspended/standing.
Ensure that the airflow can circulate freely.
6.2 Installation
2 people are needed to install the unit.
CAUTION!
Risk of injury from sharp metal housing!
The inner metal of the casing can have sharp edges.
Wear suitable protective gloves.
6.2.1 Installation situation (unit installed)
A 100
1
2
3
Fig. 3: KSH installation situation
1
Spigot (Supply air/exhaust air)
2
KSH
3
Dry wall, double panelled (A = 100 mm)