background image

2

.

1.42

  

Katherm QK – 

Trench convector with energy-efficient EC tangential fan

Ready-to-install convector-based trench convectors

 Assembly and installation instructions

Table of contents

1.  

Intended use

 ...........................................................................  3

2.  

Safety information

 .................................................................  5

3.  

Scope of delivery

 ....................................................................  6

4.  

Alignment and positioning

 ...................................................  6

 

4.1 Alignment using height adjustment feet and raised floor 

 

    brackets ..............................................................................  6

 

4.2  Positioning and fixing at the installation site ........................  7

5.  

Water connection

 ...................................................................  8

6.  

Screeding / Protection from dirt

 ...........................................  9

7.  

Connection openings   Pipe openings   Water connection

 .  10

8.  

Number of height adjustment feet and raised floor feet

 ..  12

9.  

Katherm QK supply air modules

 ...........................................  12

10.   Maintenance

 ...........................................................................  14

 

10.1 Maintenance schedule ......................................................  15

11.   Electrical wiring

 ......................................................................  16

 

11.1 Controls at a glance ..........................................................  17

 

11.2 Electrical wiring .................................................................  17

 

11.3 24 V electromechanical model ..........................................  18

 

11.4 230 V electromechanical model ........................................  21

 

11.5 KaControl model ...............................................................  24

 

11.5.1 Single-circuit controls .....................................................  28

12.   Declaration of Conformity

 .....................................................  33

Key to symbols:

 
 

  

Caution! Danger!

 

Non-compliance with this 

information can lead to 

serious personal injuries or 

damage to property.

 

 Danger from 

         electrocution!

 

Non-compliance with this 

information can lead to 

serious personal injuries 

or damage to property by 

electrocution.

Carefully read these 

instructions in full prior 

to any assembly and 

installation work!

Anyone involved with the 
installation, commissioning 
and use of this product 
is obliged to pass these 
instructions on to trades 
people who are involved 
at the same time or 
subsequently, as well as 
to end users or operators. 
Retain these instructions 
until final decommissioning!

Content or design-related 

changes may be made 

without any prior notice! 

Содержание Katherm QK





































Отзывы: