7
Katherm QK nano –
Ultra-small trench heater with EC tangential fan
4.42
Ready-to-install convector-based floor trenches
Assembly and installation instructions
3. Scope of delivery
Trench heaters are delivered as standard with:
• Height adjustment feet
1
with rubber pads for acoustic decoupling
2
,
screws and rawlplugs to be provided on site
• Raised floor feet with plastic cap for acoustic decoupling
3
,
4
4. Levelling
• Remove the outer film and the packaging.
• Flap open the transparent protective cover.
Caution:
Do not remove bracing during installation and operation.
• Arrange the Katherm QK nano with the convector on the window side.
Caution:
The height adjustment feet are already fitted to the floor
trench. They are fixed the wrong way round for transport reasons. To
install and adjust the height of the trench, loosen the outer fixing nuts
on the adjustment feet and turn the height adjustment feet 180° so that
the foot is pointing outwards (see Fig.)
• Then level the trench heater and adjust the height using the adjustment
feet and adjustment screws on the raised floor brackets
3
.
• Please take care that the floor trench is installed in straight alignment and
is not twisted.Otherwise it will not be possible to lay a rigid grille (e.g. the
FineLine grille) flat into the trench.
• Use screws and dowels to fix the height-adjustment feet
1
with rubber
pads.
Example shown:
Ka
therm
QK nano,
24V model
1
Scope of delivery
Supply of the unit
