19
Katherm QK nano –
Ultra-small trench heater with EC tangential fan
4.42
Ready-to-install convector-based floor trenches
Assembly and installation instructions
10.4 KaControl model
Applications of the KaController
The
Ka
therm
QK nano and associated room control units can only be used:
• indoors
(for instance in residential properties and offices, showrooms etc.)
KaControllers should not be used
• outdoors,
• in humid areas, such as swimming pools, in wet rooms,
• in areas where there is a risk of explosion,
• in areas with a high dust content,
• in areas with an aggressive atmosphere
Description of control, Basic settings
The KaControl version provides the option of controlling
Ka
therm
QK nano
units by means of a control unit supplied separately or on-site building
management technology.
A number of different settings and configurations are possible using the DIP
switches on the PCB and parameters that can be set by the control unit.
This manual provides only a brief overview. Please refer to the
separate KaControl instruction manual for further setting options.
The KaControl system offers the possibility of grouping, although an
extension board (CANbus), available as an accessory, then needs to be
provided.
Lay control lines separately from supply lines.
Use CAT5 (AWG 23) or similar as data cables.
Wire the unit in series: star cabling is not allowed.
