Kampmann Katherm QK 190, Инструкция по сборке, установке и эксплуатации, Страница: 23 / 52

Katherm QK
Assembly, installation and operating instructions
23
1
2
3
4
5
Primary air volume flow
Pressurised air loss
Supply air spigot (oval) 51 mm x 128 mm
1
Slider position 30% open
2
Slider position 50% open
3 Slider position 75% open 4 Slider position 100% open
5 Sound power level 30dB(A)
Adjusting the slider position
The height of the supply air module is adjusted using the threaded rods and connected by the installation brackets to the sub-
strate. The slider can be moved into different positions to adjust the required volumetric flow at the supply air module. The
figure shows four different slider positions (100%, 75%, 50% and 30% opened). They are also shown in the design diagrams
in which the required pressure losses, sound levels and air volume flows can be seen. Intermediate values can be interpol-
ated.