4
1.96
Electronic continuously variable speed controller
recirculating air with digital timer and room temperature control, type 30515
Assembly and installation instructions
2. Safety information
This electronic continuously variable speed controller 0-10 V type 30515
has been developed and produced in accordance with the state of the
art and current statutory standards and guidelines. Note the contents of
this manual for proper installation and operation of the equipment.
The installation of this product requires specialist knowledge of heating,
cooling, ventilation and electrical engineering. This knowledge, generally
learned in vocational training in one of the fields stated, is not described
separately here. Damage caused by improper installation is the
responsibility of the operator.
Qualified personnel must have undergone technical training to provide
them with adequate knowledge to include the following:
• Safety and accident prevention regulations
• Guidelines and recognised technical regulations, i.e. Association of
German Electricians (VDE) regulations,
• DIN and EN standards
Safety-conscious working
• Disconnect all parts of the system that are being worked on!
• Ensure that the system cannot be accidentally re-connected! Wait until
the fan comes to a standstill!
• Only use safe lifting platforms and scaffolding for installation!
• Wire the units in accordance with the attached wiring diagrams!
• Only connect the unit to fixed cables!
• During operation, the unit must be enclosed or installed in a control
cabinet!
Modifications to the unit
Do not undertake any modifications or upgrades on the unit without
discussing these with the manufacturer as these can impair the safety
and operation of the unit. Modifications to the unit will lead to the
termination of the warranty!
Errors caused by connection or modifications can lead to the unit being
damaged! The manufacturer shall not be liable for any damage due to
the wrong connection and/or improper handling!
Caution!
As the unit automatically switches on again after power
failure, switch the speed controller to Off before connecting to mains
voltage!
Содержание 30515
Страница 29: ......
