Kampmann 30076, Инструкция по сборке и установке, Страница: 9 / 12

9
Timer 1.96
with electronic room temperature control and room temperature sensor type 30076
Assembly and installation instructions
4. Operation
The timer shifts between heating and setback mode. Set a week or day
program using the pins. Set the required temperature for the heating-up
and setback times on the setpoint indicators on both electronic controls.
4.1 Programming
Function
The timer shifts between the two potentiometers for heating mode and
setback mode. The programme dial has a 7-day week programme on one
side and a 24-hour day programme on the reverse.
The “on” and “off” times are selected using the red and blue pins:
red
Heating mode
blue Setback mode
Setting the clock
The time is set by turning the hour hand in a clockwise direction, whilst
ensuring that both the correct day and the correct time is set. Day and
time are critical as they are both located on the same dial.
The diagram shows Thursday (field IV on the programme dial) 06.60 a.m.
Important!
• Do not turn programme dial!
• Do not turn clock hands in an anti-clockwise direction!
Setting the on/off times
Set the switching times for heating mode and setback mode using the red
and blue pins.
The pins should be stuck into the teeth of the programme dial so that they
point to the required on/off times.
red
Heating mode
blue Setback mode
Example: Field III = Wednesday, the red pin switches to heating mode at
7:00 AM and the blue pin switches to setback mode at 07:00 PM.
III = Wednesday
red = Day
IV = Thursday
Pin
programme dial
trip switch
blue = 19:00
setback