4
Regulations
• Accident prevention regulations
• DIN VDE 0100, DIN VDE 0105
• EN 60730 (Part 1)
• Technical wiring regulations (TABs) issued by the regional electricity
providers, as well as the generally recognised technical regulations
1.2 Safety information
Installation, assembly and maintenance of electrical equipment should only
be conducted by a qualified electrician (Association of German Electricians
approved or similar). Wiring should comply with current Association of
German Electricians’ (VDE) guidelines and regulations set out by the
regional energy supply companies (EVU).
The installer of this unit should have adequate technical knowledge about
the following:
- Safety and accident prevention directives,
- Guidelines and recognised technical regulations, such as German
Association of Electricians (VDE) regulations
- DIN and EN standards.
Attention:
Non-compliance with these directives and the detailed instruction
contained within this installation manual can cause the unit to
malfunction, resulting in damage to the unit itself and possible fatal
injury. Incorrect wiring can also result in fatal injury!
Safety-conscious working
• Disconnect all parts of the system from the mains power supply before
starting any wiring and maintenance work!
• Ensure that the system cannot be accidentally re-connected!
• Please read this manual in full to guarantee the correct installation and
trouble-free operation.
Anyone involved with the installation, commissioning and use of this
product is obliged to pass this manual on to tradesmen who are involved
at the same time or at a later date, as well as to the end user or operator.
1.96
Timer
with electronic room temperature control and room temperature sensor type 30076
Assembly and installation instructions
Содержание 30076
Страница 12: ......