1.96
Climate Controller Type 148941 / Type 148942 / Type 148943 / Type 148944
Operation manual
15
8 Parameter Settings
Special system requirements can be configured using parameter
settings in the Expert menu. The following system requirements are
available:
•
Display
•
Lock operating functions
•
Type of setpoint setting
•
Inputs and outputs
•
Sensor calibration
•
Control and regulation parameters
The expert level is protected by the password "0022".
8.1 Setpoint
In this menu, you can adjust setpoints and limit values, as well as room
temperature control functions.
Base setpoint:
Base setpoint for room temperature control. Both with relative value
and absolute value temperature setting.
Minimum
Lower limit of the adjustment range of the absolute setpoint.
Maximum
Upper limit of the adjustment range of the absolute setpoint.
Adjustment range:
Maximum offset of the control setpoint to the base setpoint with
relative value temperature setting.
Increment:
Increment width for temperature adjustment.
Frost protection (room frost protection)
Temperature at which the room frost protection function and the
corresponding alarm is enabled.
Heat protection
Temperature at which the heat protection function is enabled.
Unit frost protection
Temperature at which the unit frost protection function and the
corresponding alarm is enabled.
Presence/Offset
Hold:
Offset is retained when changing from occupied to
unoccupied.
Reset:
Offset is set to “0” when changing from occupied to
unoccupied.
This function is valid for the relative and absolute value
temperature setting.
