4
3
IMPORTANT
Before replacing the valve ensure that
the black sealing washer is in place
(3).
WARNING
NEVER OPEN THE ZIP ON THE INNER TUBES WHILST THE POLES ARE
INFLATED. THIS WILL RESULT IN THE POLE BURSTING.
Unroll and lay the awning out in the
required position (1). Peg each
corner of the awning ensuring that
you tension the awning between the
pegs and making sure that the
awning keeps it’s shape. You will
probably need to re-peg later.
1
SET UP
Unpack the awning and separate and identify the different parts.
2
The roof fly and tunnel of this
awning are detachable to allow
attachment on either side of a
vehicle. Before inflating the awning it
is best to take the opportunity to
attach the roof fly and tunnel in
your desired posoitopn as it is more
difficult to do so when inflated.
Use the Velcro straps and clips
supplied to connect the hood and
tunnel. (2)
