5
Starting from one end of the tent,
unscrew the top cap, of the inflation
valve and attach the pump nozzle (4).
Pump up each AirPole. (5). The pump
has a pressure gauge and each
AirPole should be inflated to 7 psi
(0.482 bar). As each AirPole is
inflated the tent will lift. It is normally
necessary to go inside the tent and to
push the poles upwards so that the
AirPoles can assume their correct
shape. Inflate the canopy last. (6)
Once all the AirPoles have sprung
outwards, assuming their correct
shape, detach the pump from the tent
and tighten the outer valve cap on
each inflation point. It is important that
these are tight to prevent the seepage
of air.
Inflate the internal bracing beams and
place them in the sleeves inside the
tent. (7)
Close all doors and entrances and
check the positioning of the corner
pegs again. If necessary re-peg to
ensure that the groundsheet is taut
inside the tent. Peg the front canopy
last.
Peg all the intermediate pegging
points ensuring that each side is
straight.
4
5
7
6
