background image

 9 

 

ACE MONSOON POLES(OPTIONAL EXTRA) 

The Monsoon poles are designed to give extra support 
to  the  roof in  extreme  weather  conditions.    They may 
also offer extra support where the awning fit to the car-
avan is not perfect.   
 
The  Ace  Monsoon  Poles  are  either  sold  as  a  set  of 
three  or  individually.    Each  pole  can  be  extended  to 
reach the front stretcher pole. 
 
Assemble the Monsoon poles  - these are shock cord-
ed and just need slotting together, ensuring that each 
pole is fully inserted into the adjoining metal ferrule. 
 
One end, of the pole, has a rubber stopper.  Push this 
end of the pole over the centre aluminium stretcher bar 
(6)  and  then  push  the  rubber  stopper  into  the  pocket 
near  the  roof  ensuring  that it is fully inserted  (7).    At-
tach  the  clip,  on  the  other  end  of  the  pole,  onto  the 
stretcher  bar  at  the  front  of  the  awning  (8)  ensuring 
that the Monsoon pole is parallel with the exterior roof 
poles. 
  
 

SEAMS 

The main seams of this awning have been factory taped to help prevent leakage.  De-
pending  upon  your  expectations,  it  may  be  necessary  to  treat  the  remaining  seams 
with a seam sealant.  Seam sealant should also be applied to areas where the taping 
is damaged or has peeled away through wear and tear.  It can also be applied to areas 
where a leak may have developed.  Seam sealant is available through your dealer.   
 

SUITABILITY 

This awning is designed for use in light to moderate weather.  During strong winds or 
snowfall we recommend that you take your awning down.  The awning is designed for 
occasional use; it is not designed for static or commercial use. 
 

UV DEGRADATION 

Awning  fabrics  can  be  weakened  by  prolonged  exposure  to  sunlight.    Under  normal 
holiday use your awning will give long service but use for extended periods in strong 
sunlight will soon cause deterioration.  In those cases it would be wise to use a site as 
shaded as possible.  UV degradation is not covered under the warranty.  The warranty 
does not cover awnings used on permanent sites, displays or for commercial purpos-
es. 

 10 

 

CONDENSATION 

Under certain conditions awnings will be affected by condensation inside. See page 2 for more 
information  about  condensation.  Condensation  and  its  effects  are  not  covered  under  the 
warranty and should not be confused with leaking. 
 

SAFETY 

DO  NOT  COOK  IN  THE  AWNING  OR  USE  NAKED  FLAMES.    READ  AND  UNDERSTAND 
THE FIRE PRECAUTIONS LABEL SEWN INTO THE INSIDE OF THE AWNING. 
 

DISMANTLING 

Reverse the set up procedure.  Ensure that all parts are clean before packing in the carry bag.  
If the awning is wet or damp, dry fully as soon as possible. 
 

FOLDING THE AWNING 

Using two people, hold the awning at the tie down attachment points and lay the awning down 
on  the  ground  so  that  the  outside  of  the  roof  is  on  the  ground  and  the  front  windows  are 
upwards  on  top  of  the  roof.    Protect  the  awning  from  dirt  and  damage,  if  necessary,  before 
laying on the ground.  Fold each end inwards to create a rectangle.  From the outside edges, 
fold  the  panels  in  half  until  the  awning  is  the  correct  width  for  the  carry  bag.    Then  roll  the 
awning, towards the open end (end with the awning beading).  The awning should now fit into 
he bag.  The awning frame and the draught skirt can be rolled up with the awning. 

CARE 

 
Awnings are best stored opened out.  Air fully and ensure it is totally dry before packing away.  
Store  in  a  well  ventilated  dry  place.    A  wet/damp  awning  will  develop  mildew  surprisingly 
quickly. 
 
Dirty awnings can be washed using clean water and a soft brush.  Do not scrub and never use 
detergents. 
 
Poles  should  be  protected  from  damage  and  should  be  stored  completely  dry  to  prevent 
corrosion.  Damage  due  to  improper  use,  wind  damage  or  neglect  is  not  covered  under  the 
warranty.  Have any damage repaired at the first opportunity.   

Failure in the poles normally occurs through incorrect use.  Make sure that poles sections are 
fully  inserted  into  their  adjoining  pole  and  do  not  over  stress  the  pole  beyond  its  designed 
curve.  You can purchase replacement poles from your dealer.  Connecting springs or shock 
cord,  used  to  connect  poles  together,  are  consumable  parts  and  are  not  covered  under  this 
guarantee.  
 
Zips should be treated with care, use two hands to close and open and never tread on them.  
Never force a zip but release the tension that it stopping it from closing. 
 
We  strongly  recommend  that  you  carry  a  comprehensive  spares  kit  including  silicone 
waterproof spray, seam sealer, and spare guy ropes and pegs for extreme weather. 
 
Repairs  to  the  flysheet  should  be  made  by  a  company  recommended  by  Kampa  or  your 
supplying dealer.  Repairs and alterations made by an unauthorised company may invalidate 
your warranty. 

 
 

Отзывы: