Kamoer Fluid Tech(Shanghai) Co., Ltd. DIP-KK300 V2 User Manual
7
5.
Working mode - flow mode
Set the working mode to the flow mode through the function menu, and the parameters set in the
flow mode include the flow rate (in milliliters per minute), the amount added (in milliliters), and the
stop time (in seconds).
Fully automatic cycle mode setting
1. When the pump is stopped, the working interface displays the current flow rate (ml/min);
2. Press and hold the encoder to enter the pump addition setting interface;
3. Rotate the encoder to set the amount added, the setting range is 0-9999ml;
4. Short press the encoder to switch to the pump stop time setting interface. At this time, the first
digit of the digital tube only displays the lower half ;
5. Rotate the encoder to set the stop time, the setting range is 0~999 seconds;
6. Long press the encoder to return to the flow display interface, and the added amount and stop
time will be automatically saved;
7. Short press the encoder, the pump starts to cycle according to the set addition amount and stop
time;
8. Short press the encoder, the pump stops, and the digital tube switches to the flow display interface.
Semi-automatic cycle mode setting
Just set the pump stop time to 0 in step 4 of the fully automatic circulation mode setting. At this time,
the pump stops running according to the set amount of addition, and will not start automatically
again; if you need to start again, short press the encoder.
Manual mode setting
In the setting of fully automatic cycle mode, set the pump addition amount to 0 in the second step,
and set the pump stop time to 0 in the fourth step. At this time, the start and stop of the pump are
all controlled by the encoder or foot switch, and during the operation The flow can be adjusted with
a rotary encoder.