Kamikaze KVS6000, Руководство пользователя

Страница: 38 / 128

38
Display code Failure description Cause Solution
E1
Machine stops and the
screen flashes red.
Jammed machine or chain too tight Check pulley, gearbox and
adjust chain.
E2 Overexertion or failure of the current
controller. Reduce the cutting
diameter or contact SAT.
E3
Current control circuit failure. Contact SAT.
E4
Voltage control circuit failure Contact SAT.
E5
Low voltage or deteriorated battery Charge the battery or
replace it.
E6
Overvoltage battery Replace the battery
E7
Excess current, protection software. Automatically recovers
E8
Engine failure and cable break. Contact SAT
E15
Mos-Fet controller overtemperature,
protection software. Automatically recovers
E13 The pump is not greasing and
the display flashes red. Oil pump failure Contact SAT
Note: If you have any questions, contact a technical support center.
8 Technical Specifications
Motosierra
1 Maximum cutting dimensions 160 mm
(with 8 ” bar)
2 Chain speed 8,8 m/s
3 Bar length 18,5,0 cm – 6 ”
4 Chain 1/4 x 1,1 - 38 Teeth
5 Chain tension adjustment Manual
6 Lubrication Automatic oil SAE 30
7 Display visualisation
Battery charge status, lubrication
setting, working hours and errors
8 Motor Brushless
9 Rated voltage DC 21,6 V
Maximum voltage 25.2 V
10 Rated power 950 W
Maximum power 1200 W
11 Chainsaw Dimensions 48 x 11.7 x 17.5 cm
12 Weight without battery 1,4 kg
13 Weight with battery 1,9 Kg
Battery (lithium-ion) LiCoO
2
21700 (6S1P)
1 Capacity 4,0 Ah
2 Tension 21,6V
3 Power 86,4 Wh
4 weight 490 g