Kamikaze KVS6000, Руководство пользователя

Страница: 34 / 128

34
•
Do not disassemble or damage the battery to avoid personal injury.
3.4 Correct use of battery charger
•
Use this battery charger only with rechargeable batteries. Otherwise it could cause fire and
explosions. Use only the original battery charger.
•
Always check the charger, the cable and the plug before each use. If damaged, ask to the service
center for repair or replacement. Do not use damaged chargers. Do not try to repair damaged
battery chargers to keep the tool safe.
•
Check that the voltage of the charger matches the one of the battery, otherwise it may cause
personal injury.
•
Keep the charger clean, away from humid environments and rain. Do not use the charger outdoors:
dirt and water may cause damages to the charger and personal injury.
•
The charger is designed for use with original batteries, otherwise it may cause risk of fire or
explosions.
•
Do not use damaged chargers to reduce the risk of injury.
•
Do not use the charger on flammable surfaces (eg. paper).
•
The battery is not fully charged on first use, it must be charged for 3/4 hours before first use.
•
The normal charging time is 4/6 hours (charging time for 3 fully discharged batteries), do not charge
the battery for too long to avoid damaging it.
•
The charger has three outputs, it is possible to charge up to 3 batteries at the same time. The
charging time is proportional to the number of batteries connected and to the state of their charge.
Supervise the charging time by the LED indicator (red light in charge, green light end of charge).
3.5 Attention (residual risks)
Use the tool carefully in order to avoid the following risks:
•
Cuts and wounds caused by sharp edges
•
Use for prolonged times or in incorrect positions can cause damage to your body in the long term.
Warning!
The device can produce electromagnetic waves and interfere with electro-medical devices. It is
recommended to consult a doctor before using this tool with electro-medical devices.
Warning!
Do not touch the chain when the battery is on the tool.
Keep a minimum distance of 15cm between the chain and any part of the body.
Keep passers-by and other people at a minimum distance of 1.5m
Warning!
In particular situations, the chain and the handle could reach high temperatures. It is recommended to
handle the tool with care using protective gloves.
Noise and Vibration Measurements: