5
• Do not leave the fan heater unattended
during use. Always switch off the fan heater
at the controls and at the power outlet then
unplug heater from the power outlet when
not in use.
• Do not use the fan heater to dry your laundry.
• Do not operate fan heater whilst asleep.
• Do not use outdoors. This fan heater is
not intended for commercial use such as
construction sites.
• Do not use this fan heater with an external
programmer, timer or any other devices that
switches the fan heater ON automatically
since a fire risk may exist if the heater is
covered or positioned incorrectly.
• KFH600 heater is not equipped with a device
to control the room temperature. Do not use
KFH600 heater in small rooms when they are
occupied by persons not capable of leaving
the room on their own, unless constant
supervision is provided.
• This fan heater is not intended for use in wet
or moist locations. Do not immerse or allow
liquids to be spilt on the fan heater.
• This fan heater has hot and arcing or
sparking parts inside. Do not use in areas
where petrol, paints, aerosols, or other
inflammable substances are used or stored.
• Do not operate the fan heater with the
power cord damaged, frayed or split,
wound around any part of the fan heater,
or in contact with the heated surfaces of
the fan heater.
• Do not run the cord under the carpeting or
cover the cord with rugs, runners or the like.
Arrange the cord away from traffic areas
and where it will not be tripped over or
create a tripped hazard.
• Do not operate any fan heater with a
damaged cord or plug, or if fan heater has
been dropped or damaged in any manner.
Return fan heater to your nearest Kambrook
service centre for examination, electrical or
mechanical adjustment or repair.
• Use this fan heater only as described in
this instruction manual. Any other use not
recommended by the manufacture may
cause fire electric shock or injury and voids
all warranties.
• To avoid an electrical overload. It is
recommended that no other appliances are
plugged into the same circuit as your fan
heater when it is in use.
• This heater features a tip-over switch.
If the heater tips over, it will automatically
switch off. Once placed back in the upright
position the heater will automatically switch
on again.
• Switch off at the main On/Off switch and the
power outlet, then unplug and allow heater
to cool down before cleaning or storing.
• Regularly inspect the supply cord, plug,
control settings, air inlets and outlets and
main housing for any damage, If found
damaged in any way, immediately cease
use of the fan heater and return to Kambrook
or an authorised service agent for inspection
or repair.
• Keep the fan heater clean. Follow the
cleaning instructions provided in this book.
• Do not mount heater on ceiling or walls.
