Kambrook Pulp Select KCP110, Инструкция пользователя, Страница: 7 / 12

7
Operating Instructions
Before First Use
Before using the citrus press for the first
time, rinse the cones, strainer, juice jug
and storage lid with warm water and
a few drops of washing-up liquid. Dry
all parts thoroughly before assembling
the citrus press.
WARNING: The motor
base must not be
immersed in water or
other liquids or held
under running water as
this could give you an
electric shock. Wipe the
motor base with a damp
cloth.
Assembling
1. Place the motor base on a flat,
even surface. Attach the drive
shaft to the motor base.
2.
Position the juice jug over the shaft
on the motor base. Align the juice
jug handle with the arrow marked
on the motor base and turn the
juice jug clockwise until it locks into
position.
3.
This citrus press has adjustable
pulp control by using two
strainers. To assemble, align
the lower strainer peg with
the slot in the upper strainer
(Fig. 1) and push together to click
and lock into place.
4.
Fit the strainers onto the juice
jug aligning to the notch on the
handle of the jug.
Fig. 1
NOTE:
The upper strainer can
also be used on its own.
5.
Place the small juicing cone onto
the drive shaft. Use the small cone
for juicing smaller citrus fruit.
6. To juice larger citrus fruit, with the
small cone already in place, fit the
large juicing cone on top, aligning
the notches in the large cone to
the scraper blades on the small
cone (Fig 2).
Fig. 2
7.
When storing, assemble as per
these instructions and place the
storage lid on top.