Kambrook Pulp Select KCP110, Инструкция пользователя, Страница: 10 / 12

10
Care, Cleaning and Storage
Before cleaning, ensure the power
outlet is switched off and then remove
the power plug from the power outlet.
Always clean your citrus press after
each use to prevent a build-up of
pulp and juice.
1.
Remove the storage lid, citrus
cone(s), strainers, juice jug &
drive shaft from the motor base.
Separate the cone from the
strainer and then the large cone
(if used) from the small cone for
cleaning.
2.
Separate the 2 strainers by pushing
the pulp selector knob down
(A), while pushing inwards on
Clip 1 (part B). If the strainers do
not come apart, press inwards on
Clip 2 (part C), then Clip 3 (part D),
in that order, to help disengage
the bottom strainer from the top
strainer. Refer to Fig. 3 for details.
A
B
C
D
Fig. 3
3.
Clean all removable parts in warm,
soapy water, then rinse and dry
thoroughly. To clean the motor
base, including the drive shaft,
wipe with a damp cloth before
drying.
NOTE:
The drive shaft can be
removed and washed as per
other removable parts if required,
however, always wipe down with
a damp cloth before removing
from the motor base.
WARNING: Do not
immerse the motor base,
cord or plug in water
or any other liquid.
Recommended
It is best to rinse or wash all removable
parts immediately after use as dried
citrus pulp is difficult to remove and
may stain.
Storage
To store the citrus press:
1. Ensure the power is switched off at
the power outlet and then unplug
the power cord from the power
outlet.
2.
Clean and dry all the parts of the
citrus press immediately after use
and before storing.
3.
Re-assemble the unit as per
instructions in the Assembling
section on page 7 of this book.
4.
Wrap the cord around the cord
storage on the motor base and set
the storage lid on top of the citrus
press before storing.