Should this occur, switch off at the power
outlet and unplug. Allow the kettle to cool
down before refilling.The safety device will
automatically reset when the kettle has
cooled down.
For additional safety your kettle is fitted
with an additional thermal cut out. In the
event of overheating, the kettle will
automatically shut down to prevent
further damage. Should this occur, take
your kettle to an authorised Kambrook
Service Centre.
Maintaining Your Kambrook
Stainless Steel Cordless Kettle
Always switch appliance off, then switch
off at the power outlet and then unplug
before cleaning the appliance.
WARNING: DO NOT IMMERSE
the appliance, power cord, base
or plug in water or any other
liquid
Cleaning the Polished Exterior &
Removable Filter
The stainless steel surface may be wiped
over with a damp cloth and polished with
a soft clean dry cloth.
Note: Do not use chemicals, steel wool, or abrasive
cleaners to clean the outside of the kettle
The filter fitted inside the kettle over the
spout is removable by sliding in and out of
position. Ensure the kettle and water have
cooled down before attempting to clean
the filter.
The filter can be washed in warm, soapy
water.
Mineral deposits and discolouration
Due to the large surface area of the
concealed element interior base,
discolouration due to mineral deposits will
appear more obvious.The mineral
deposits can leave a brown stain on the
base.THIS IS NOT RUST.
To remove the discolouration follow the
cleaning instructions “Removal of mineral
deposits”.
Removal of Mineral Deposits
Mineral deposits in tap water may cause
the kettle interior to discolour over time.
This may be removed by using a kettle
descaler which is available from most
leading supermarkets, department and
hardware stores.
Alternatively: Fill the kettle with 3 cups of
white vinegar and the remainder (up to
2/3 of maximum) with water, boil and
allow to stand overnight.
Empty the solution from the kettle. Fill the
kettle with clean water, bring to the boil
and discard the water. Repeat and the
kettle will be ready for use.
