Using Your Kambrook
Stainless Steel Cordless Kettle
Before first using your Kambrook
Cordless Stainless Steel Kettle, we
recommend that the kettle is filled to the
maximum level, boiled and water
discarded.Your kettle will only operate
when positioned on the multi-directional
base with the ON/OFF switch in the
“ON” position.The kettle will
automatically switch “OFF” when the
water is boiled.
To fill the kettle, remove it from the multi-
directional base and open the lid. Fill with
the desired amount of water. Never fill the
kettle above the ‘MAX’ mark, which is
indicated inside the kettle.Too little water
will result in the kettle switching “OFF”
before the water has boiled.
Note: Do not fill above the MAX mark as boiling
water may splash out from the kettle.The max line
is shown on the red indicator inside the kettle.
Ensure the lid is firmly in place before
placing the kettle on the multi-directional
base.
Position the kettle on the multi-directional
base. Plug the cord into a 230 / 240 volt
power outlet and switch the outlet on.
Flick the ON/OFF switch downwards –
the Power “ON” light will illuminate.
Once the water has boiled the kettle will
automatically switch “OFF”. Lift the kettle
from the multi-directional base and pour
the water.
Note:This kettle must only be used with the multi-
directional base supplied. Use caution when
pouring water from your kettle as boiling water will
scald.
CAUTION:
• Do not operate the kettle on an
inclined surface
• Do not operate the kettle without
water
• Do not move the kettle while it is
switched ‘on’
• Do not remove the lid while water
is boiling
• Do not use the kettle to heat or
boil any liquid or foodstuff other
than water
• Ensure the kettle is switched ‘off ’
before it is removed from the base
The kettle may be stored on the multi-
directional base when not in use.The
power should be switched off at the
power outlet and then unplugged when
not in use.
This kettle is fitted with a safety device,
which protects against overheating should
your appliance be operated with insufficient
water. If this occurs the kettle will stop
heating and automatically switch “OFF”.
