Kambrook KPZ200, Инструкция пользователя, Страница: 15 / 28

14
Troubleshooting guide
Problem Possible Reason Solution
‘HEATING’ light not
illuminating • ‘TIMER’ has not been set and is
still in the OFF position
• The ‘HEATING’ light may cycle
on and off during operation,
this is the automatic thermostat
light, indicating that the
correct temperature is being
maintained • Set ‘TIMER’ to desired cooking
time (pizza oven will not turn on
until timer is set)
Lid not closing • Pizza toppings are too high
and touching the heating
element • Remove pizza from the pizza
stone, remove some toppings and
wait until heating element has
stopped producing smoke before
replacing pizza back onto the
stone and into the pizza oven
Top heating element
producing smoke • Pizza toppings are too high
and touching the heating
element • Remove pizza from the pizza
stone, remove some toppings and
wait until heating element has
stopped producing smoke before
replacing pizza back onto stone
and into the pizza oven
Ceramic stone not rotating • ‘TIMER’ has not been set and is
still in the OFF position
• Lid is not closed • Set ‘TIMER’ to desired cooking
time (pizza stone will not rotate
until ‘TIMER’ has been set)
• Ensure lid of pizza oven is closed
Pizza dough is undercooked • Cooking time is too short
• Pizza oven was not pre-heated
• Reset ‘TIMER’ and cook for
additional time as per recipe
setting guidelines/and or until pizza
topping ingredients and pizza
base is cooked
• Pre-heat pizza oven on ‘HIGH’
for at least 10 minutes, ensuring
that the ‘TIMER’ is set
Pizza toppings are
undercooked • Cooking time is too short
• Pizza oven was not pre-heated • Reset ‘TIMER’ and cook for
additional time as per recipe
guidelines or until pizza topping
ingredients and pizza base is
cooked
• Pre-heat pizza oven on ‘HIGH’
for at least 10 minutes, ensuring
that the ‘TIMER’ is set