8
Using Your Personal Foot Warmer
Before First Use
Remove any promotional
material from the Kambrook
Personal Foot Warmer.
Unwind the cord to its full length and
place the foot warmer on a firm, level
surface in a stable upright position.
Visually inspect the air inlet and outlets
to ensure there are no blockages.
Turning Your Kambrook
Personal Foot Warmer On
Ensure the On/Off switch is in the
off (O) position.
Fig. 1
Plug the cord into a 230V or 240V
power point and switch on.
NOTE:
Be sure the plug fits
tightly as a loose fit will cause
overheating and damage
the plug.
NOTE:
To avoid an electrical
circuit overload, it is
recommended that no other
appliances are plugged into the
same circuit as your personal
foot warmer, when it is in use.
Press the On/Off switch to the on
(I) position, and the Personal Foot
Warmer is ready to use.
The On/Off switch will illuminate when
the Personal Foot Warmer is turned on.
NOTE:
To avoid receiving a
quick cool burst or air across the
top surface of the Personal Foot
Warmer, it is recommended to
heat the Personal Foot Warmer
for a minute before placing your
feet onto the Personal
Foot Warmer.
The Personal Foot Warmer moves
air quietly. The large top surface
accommodates feet easily and
disperses warm air across the Personal
Foot Warmer top surface to warm
cold feet.
WARNING:
Do not
stand on the Personal
Foot Warmer surface
to avoid damaging the
foot warmer.
NOTE:
Do not totally block
the air outlet in any manner to
avoid overheating the Personal
Foot Warmer.
NOTE:
The Personal Foot Warmer
has a heated surface. Socks
or similar may be worn to
avoid direct skin contact with
the heating surface to avoid
possible skin irritation for persons
sensitive to heat.
Содержание KFR200
Страница 1: ...Instruction Booklet Personal Foot Warmer KFR200...
Страница 11: ...11 Notes...