11
1.
Cut the food to be used into
pieces large enough to fit into
the feed chute.
2.
Remove the food pusher and
stack the food inside the feed
chute.
3.
With one hand, hold the handle,
and using your thumb press and
hold the ‘ON/OFF’ button to
commence operation (see Fig. 4).
Fig. 4
4.
Whilst holding the handle and
pressing the ‘ON/OFF’ button,
use your free hand to push the
food through the feed chute and
process the food at a slow even
rate.
5.
The processed food will begin to
be released from the processing
chamber.
NOTE:
Ensure that there is a
bowl or plate available to catch
the processed foodstuffs as they
are released.
6.
Release the ‘ON/OFF’ button. The
food processor stops operation.
7.
When processing has been
completed, wash the food pusher,
food chamber and processing
drums as instructed in the Care,
Cleaning and Storage section on
page 12.
NOTE:
Ensure all the parts are
clear of food residue before
changing the processing drum to
continue operation.
CAUTION:
The processing
drums can be changed
once the food processer
is clear of food and
the power outlet has
been switched off and
unplugged. Changing
the drums whilst the food
processor is turned on
can be dangerous and
could cause injury. Do not
come into contact with
any moving parts during
operation.
Содержание KFP60
Страница 2: ...Speed Serve Continuous Flow KFP60 Instruction Booklet...
Страница 14: ...13 Recipes...
Страница 19: ...18 Notes...
Страница 20: ...19 Notes...