![background image](http://html1.mh-extra.com/html/kambrook/keb435/keb435_instruction-booklet_3331736008.webp)
7
No heating wire must be trapped
or tucked into any part of the bed.
Ensure the elastic of the fitted skirt is
completely tucked under the entire
mattress and secure.
NOTE:
Ensure that the blanket is
stretched completely flat when
placed on the mattress and
creases or rucking is not evident.
CAUTION:
No heating
wire must be trapped or
tucked into any part of
the bed.
When fitted to the mattress
correctly, the controller socket(s)
should be positioned at the top end
of the mattress, near occupants
shoulder area (See Fig.2).
Fig. 2
Ensure that when the blanket is fitted
onto the mattress the controller(s) and
flexible power supply are outside of
the bed coverings and located in a
position that will prevent accidental
damage to the controller housing and
cords.
Use this blanket only as an under
blanket and do not use above the
occupant of the bed.
Before First Use
Remove any promotional material
and packaging from the heated
blanket.
Securing Your Fitted Heated
Blanket
Unfold the heated blanket and
lay flat on the mattress ensuring
that the skirt is aligned with the
corresponding edges and that the
controller socket(s) is facing up and
positioned at the top end of the
mattress.
Ensure that the heating wire section
on the heated blanket is clear of the
pillow and does not hang over the
sides of the mattress.
Pull the elastic inside the fitted
skirt over the ends of the mattress
(See Fig.1). Ensure to pull the middle
of the blanket so that it is evenly
stretched and distributed over the
entire mattress, ensuring there are no
creases or rucking.
Fig. 1
NOTE:
The heated blanket must
not be wider than the mattress
with which it is to be used such
that the heating wire hangs over
the sides of the mattress. It is
normal for a small section of the
fitted skirt to be showing on top
of a larger sized mattress.
Using Your Kambrook Heated Blanket