PIR 180° IP65 MOTION SENSOR
MCR-09
USER MANUAL
ZAMEL Sp. z o.o.
plik: mcr-09_inst_ext_gb | modyfikacja: 15.05.2020
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04
www.zamel.com, e-mail: [email protected]
APPEARANCE
FEATURES
DESCRIPTION
NOTE
• Detection angle: 180°.
• Surface mounting, with flush-mounted
connection cables going into the sen-
sor housing.
• Hermetic sensor housing: IP65.
• Detection area can be adjusted by ro-
tating the sensor head.
• Large detection area up to 12 m.
The MCR-09 hermetic motion sensor
is designed for automatic light control or
for controlling any other electric receiver.
Its design is based on a state of the art in-
frared (PIR) motion detector system. The
device detects motion in the monitored
area within the radius of ca. 12 m, within
180° around the sensor. The design of
the device enables its installation outside
the building. The field of detection can be
adjusted by adequately setting the sen-
sor head. The condition of external light
intensity is additionally verified during op-
eration. If the device detects motion and
the light intensity level is below the setting
value, the sensor will turn the light on and
start to count the preset time, after which
the light will be automatically turned off.
Thanks to its versatile design, the sensor
can be used to control the lighting of com-
munication routes, gardens, warehouses,
toilets, halls, as well as other facilities.
Read this User Manual carefully before connecting and operating the device. The device must be installed by a qualified electrician.
Connect this product to a single-phase power system according to applicable standards. See this Manual for the wiring instructions. The
activities related to the installation, connection and adjustment should be performed by qualified electricians, familiar with the User Manual
and functions of the device. Do not open or otherwise disassemble the product enclosure; otherwise the product warranty will be void and
an electrocution hazard may occur. Prior to installing and wiring this product, make sure that the wiring to be connected is not live. The
conditions and methods of transport, storage and operation of this product may affect its performance. Do not install the products if any of
its components are missing, the product is damaged or deformed in any way. If any malfunctions are found, consult the manufacturer. The
manufacturer is not be liable for any damage resulting from improper installation or operation of the device. Any repairs or modifications
made independently will void the warranty. Since the technical data are subject to constant modifications, the Manufacturer reserves the
right to change the product characteristics and introduce other design solutions for the device.
TECHNICAL DATA
Power supply voltage: 230 V AC
Voltage frequency: 50 Hz
Motion detection angle: 180°
Maximum effective zone: 12 m (selectable)
Time to turn on the lighting: 3 s ÷ 15 min
Time measurement accuracy: depending on the setting: for 10 s: ±3 s, for 15 min: ±2 min
Scope of light sensor settings: 3 ÷ 2000 lux
Acceptable load:
Traditional bulbs: 1200 W
Fluorescent tubes: 300 W
LEDs: 60 W
Power consumption: <0,5 W
Installation height: 1,8 ÷ 2,5 m
Operating temperature: -20 ÷ +40 °C
Permissible humidity: < 93% RH
Dimensions: 200 x 52 mm
Weight: 0,79 kg
Do not dispose of
this device in the
trash can with other
waste! In order to
avoid harmful effects
on the environment
and human health,
store used device in specially
designated places. Household
electronic waste can be returned
for free and in any amount to
the collection point established
for this purpose, and also to
the shop when buying new
equipment.
Light switch
time adjustment
Light sensor
adjustment
Motion sensor
