Kambrook KBL188 Series, Инструкция пользователя

Страница: 4 / 24

4
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook
Blitz Power Blender
• Carefully read all instructions before operating
the Kambrook Blitz Blender for the first time
and save for future reference.
• Remove and safely discard any packaging
material and promotional labels before using
the blender for the first time.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug of
this blender.
• Do not place the blender near the edge of a
bench or table during operation. Ensure the
surface is level, clean and free of water and
other substances. Vibration during operation
may cause the blender to move.
• Do not use the blender on a sink drain board.
• Do not place the blender on or near a hot gas
or electric burner, or where it could touch a
heated oven.
• Handle the blender and attachments with
care – remember the blades are razor sharp
and should be kept out of the reach of
children.
• Always ensure the blender is completely
assembled before operating. The blender will
not operate unless properly assembled.
• Do not use attachments other than those
provided with the blender.
• Do not attempt to operate the blender by any
method other than those described in
this booklet.
• Always completely assemble the blade holder
assembly onto the cup before locking to the
motor base.
• Always operate the blender with the
assembled cup locking properly to the
motor base.
• Keep fingers, hands, knives and other utensils
away from moving blades.
• Always switch off the blender at the power
outlet and unplug the power cord from the
power outlet before attempting to move the
blender, when not in use, if left unattended
and before disassembling, cleaning or storing.
• Unlock the assembled cup from the motor
base. Ensure the motor and the blades have
completely stopped before disassembling.
• Care should be taken when removing the
food from the assembled cup. Always unscrew
the assembled cup with the blade holder on
the top of the cup.
• Do not operate the blender continuously for
periods longer than 30 seconds at a time or if
processing a heavy load. None of the recipes
in this book are considered a heavy load.
Allow to cool for at least 2 minutes after each
use. If the blender is operated continuously
for too long, it should be allowed to rest for 30
minutes before recommencing.