![background image](http://html2.mh-extra.com/html/kambrook/kb600/kb600_manual_3325300004.webp)
RECIPES
Dips and Starters
GUACAMOLE
1 large avocado, peeled, de-stoned and
chopped
40ml lemon juice
1
/
2
cup sour cream
1 teaspoons minced garlic
1 teaspoon chilli
1. Place avocado, lemon juice, sour cream,
garlic and chilli sauce in blender jug.
2. Use Speed 2 and blend until smooth.
Serve with crustini or crudités
PESTO DIP
1 cup fresh basil leaves
1 clove garlic peeled and chopped
40ml lemon juice
60g pine nuts
1
/
4
cup olive oil
1
/
2
cup cottage cheese
60g grated fresh Parmesan cheese
1. Place basil leaves, garlic, lemon juice and
pine nuts in blender jug.
2. Use Speed 2 and blend until finely
chopped.
3. With motor running, pour in oil and
blend until smooth. Add cheeses and
mix to combine.
4. Chill until ready to use.
Serve with toasted Turkish bread.
Soups
TOMATO SOUP
1 tablespoon oil
2 cloves garlic, crushed
1 brown onion, peeled and diced
2 x 410g cans diced tomatoes
1 tablespoon tomato paste
2 teaspoons brown sugar
3 cups (750ml) vegetable stock or water
1. Heat oil in a large saucepan, add garlic
and onions, cook over a medium heat
for 2-3 minutes or until onion is soft.
2. Combine tomatoes, tomato paste, and
brown sugar.
3. Pour into pan with onion mixture, add
stock or water and bring to the boil,
then reduce heat and simmer,
uncovered for 20 minutes or until liquid
has reduced by one third.
4. Allow the mixture to cool, then
transfer mixture into three batches into
blender jug.
5. Use Speed 4 and puree until smooth.
Return each pureed batch to saucepan
and gently heat through before serving.
PUMPKIN SOUP
2 tablespoons cooking oil
1 brown onion diced
2 cloves garlic, crushed
400g Butternut pumpkin, peeled and diced
4 cups (1litre) chicken stock
1. Heat oil in a hot saucepan, add onions
and garlic and sauté for 5 minutes.
6
ICE CRUSH SETTING
For ice crushing, select the ‘ICE CRUSH’
function. Depress and hold down the ‘ICE
CRUSH’ button in short bursts until the
desired result is achieved. The maximum
amount of ice cubes the blender can blend
at any one time is 1 standard ice tray or
250g.
NOTE:
During the blending process, ingredients
may stick to the sides of the blender jug.
To push the food back onto the blades,
ensure the blender is switched off by
depressing the ‘ON/OFF’ button, then
switch off at the power outlet and remove
the plug. Remove the lid and use a plastic
spatula to scrape down the sides of the
jug. Replace the lid before recommencing
blending.
If any moisture or liquid appears on top of
the motor base, ensure the blender is
switched off by depressing the ‘ON/OFF’
button, then switch the appliance off at the
power outlet and unplug the cord.
Remove the blender jug.Wipe the motor
base immediately with paper towelling and
check the blender jug is correctly
assembled.
When blending liquids, a small amount of
liquid may escape from the inner lid. This
is normal.
DISASSEMBLING THE
BLENDER FOR CARE AND
CLEANING
Always ensure the Kambrook Electronic
Blender is switched off by depressing the
‘ON/OFF’ button, then switch the
appliance off at the power outlet and
unplug the cord before cleaning.
To remove the blade, grip the blade
assembly located underneath the blender
jug and turn in an anti-clockwise direction.
Wash the inner lid, lid, blender jug, blade
assembly and rubber seal in warm, soapy
water after each use. Rinse and dry
thoroughly.
Wipe the motor base with a soft, damp
cloth.
To reassemble the blender jug,
Place the rubber seal into the blade
assembly.Then place the blade assembly
into the jug base. Screw the blade
assembly in a clockwise direction until
firmly locked into position.
Do not use chemical, steel wool, or
abrasive cleaners to clean any parts of the
blender.
Do not place the blade assembly in the
dishwasher.
The blender jug (without the blade
assembly), inner lid and lid can be placed
in the dishwasher
Do not immerse the motor base in water
or any other liquid.
STORAGE
Ensure the appliance is switched off and
unplugged from the power outlet. Ensure
all parts are clean and completely dry
before reassembling. Store assembled
blender upright on a level surface. Do not
place any heavy objects on top of the
blender during storage.
5
Содержание KB600
Страница 7: ...12 11 Notes Notes...