13
Brewing the coffee
1. Ensure the selector control is in the
‘STANDBY’ mode, plug the power
cord into a 230V or 240V power
point and switch ‘ON’ at the
power point.
2. Turn the espresso machine on
by pressing the power On/Off
button to the ‘ON’ position;
the 'POWER' light will illuminate
red and the ‘HEATING’ light will
illuminate orange indicating that
the machine has commenced
heating.
3. Once the machine has reached
optimum temperature, the
'HEATING' light will automatically
switch off.
NOTE:
If the 'HEATING' light has
not switched ON, this is because
the machine has already
reached optimum temperature
during the machines pre-heating
and purging process. The
'HEATING' light will cycle On/Off
during operation.
4. Ensure the drip tray is fitted
into place.
5. Set the selector control to
the ‘ESPRESSO’
mode and
allow a small amount of water
to pour through the group head
for a few seconds without the
portafilter in place.
6. Place the assembled portafilter
with ground coffee underneath
the group head so that the
handle is aligned with the ‘INSERT’
graphic (see Fig.6).
Fig. 6
7. Insert the portafilter up into the
group head and rotate the
handle to the right until resistance
is felt or until it can no longer be
rotated. The portafilter should now
be sitting in line with the ‘LOCK’
graphic (see Fig.7).
WARNING:
The espresso
machine may be warm to
touch during operation.
Care should be taken
during use.
Fig. 7
8. Place one or two pre-heated
cups under the group head
depending on extraction
preference (1 cup or 2 cup)
(see Fig.8).
Содержание Cafe Duo KES150
Страница 2: ...Instruction Booklet Caf Duo Espresso Machine KES150...
Страница 24: ...23 Notes...