Kambrook Arctic KFA837, Инструкция пользователя

Страница: 9 / 15

9
4. Position base stand piece (b) with
the curved side facing towards
the bottom part of the tower fan
body, onto base stand piece (a)
by interlocking the four locating
posts located along the straight
edge of each of the base stand
pieces and by aligning the two
remaining screw posts located
underneath the tower fan body
with the corresponding screw
posts on base stand piece (b).
Firmly push down base stand
piece (b) until it is secured into
place with base stand piece (a)
(See Fig. 4). Secure base stand
piece (b) with the 2 remaining
fastening screws. (See Fig. 5).
Fig. 4
Fig. 5
5. Thread the power cord through
the circle cord opening located
in the base stand piece, pressing
into the cord clip to keep it
secure. (See Fig. 6).
Fig. 6
6. Return the tower fan to its upright
position; it is now ready for use.
WARNING: Do not operate
the tower fan without the
base stand fitted.
Turning Your Tower Fan On
To operate the tower fan, plug the
power cord into a 230V or 240V
electrical outlet and switch the outlet
on. Be sure the plug fits tightly as a
loose fit will cause overheating and
damage the plug.
Once the power outlet is switched
on, the fan is in ‘Standby’. In Standby,
the fan is not turned on but the LED
screen will illuminate displaying the
current room temperature only.
a
b
WARNING: Make sure the
power cord is not trapped
between the base stand
pieces and tower fan body.