Kamasa-TOOLS K 9901, Быстрый старт

Страница: 5 / 8

5
MAINTENANCE
1 If the tool is used every day, disassemble and inspection is recommended every 6 months.
2 Dry the filter and the air inlet of the tool.
3 Lubricate the quick connect coupling to prevent blocking.
4 Air tools require lubrication throughout the life of the tool. Since the compressed air
driving the motor contains water, the tool must be lubricated daily. We also recommend
water separator in the air supplying system.
5 Use Molybdenum Disulfide (MoS
2
) grease for all gearboxes and impact mechanisms.
6 Avoid storing the tool in a location subject to high humidity. If the tool is left as it is used,
the residual moisture inside the tool can cause rust. Before storage, lubricate tool and run
it for a few seconds.
7 Perform regular inspection of spindles, threads, and clamping devices in respect of wear
and tolerances.
8 If the tool is too seriously damaged to be used anymore, recycle raw material instead of
disposing as waste. The machine, accessories and packaging should be sorted for environ-
mental-friendly recycling. Check with your local authority or retailer for recycling advice.
9 Tools repair and maintenance should be carried out by an authorized service center.